UTILIZATION OF WET EX SHELL OIL PALM FACTORY HYDROCYCLONE PT. PALMINDO MITRA LESTARI FOR BIOMASSA POWER PLANT POWER
Abstract
This study aims to determine the potential of biomass electricity generated from the shell the rest of the production of palm oil mill PT. Palmindo Mitra Lestari. By converting the value of the availability of shells obtained within one hour of production with a calorific value of 23569.2595 kJ / kg and converted to 3,600,000 kJ / h = 1 MW to get the value of the power generated. The potential power output if the operating hours of the system clock generator adapted to production amounted to 13,660 MW. Average potential power that can be generated from the production of eggshell during 2013 Ex Hydrocyclone if the generating system operates 24 hours non-stop to reach 8.972 MW each hours.
Downloads
References
[2] Kadir, A., 2010, Energi, Sumberdaya, Inovasi, Tenaga Listrik Dan Potensi Ekonomi Edisi Ketiga, UIPRESS, Jakarta
[3] Sunarwan, B dan Juhana, R, Pemanfaatan Limbah Sawit Untuk Bahan Bakar Energi Baru Terbarukan (EBT), Diakses dari http://www. Jurnal teknik elektro kopwil 4, volume 7, no 2, oktober 2013. 19 Juni 2014.
[4] Syafriudin dan Rio Hanesya. 2013, Perbandingan Penggunaan Energi Alternatif Bahan Bakar Serabut (Fiber) Dan Cangkang Kelapa Sawit Terhadap Bahan Bakar Batubara Dan Solar Pada Pembangkit Listrik.
Diakses dari dien@akprind.ac.id,22 April 2014.
[5] Tiyono, 2011, Potensi Pembangkit Listrik Tenaga Biomasa Sawit PKS Ngabang Sebesar 110 Kw/Ton Sawit Perjam. Jogjakarta. Diakses dari http://www. jurnal teknik elektro vol 4 no 2, 20 Maret 2014.
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
