IMPLEMENTATION OF MOBILE AUGMENTED REALITY 3 DIMENSIONS TO DRIVE TEST PRACTICES GUIDE
Abstract
Nowaday technology has been growing up in. One of them is cellular technology, the increasing of mobile technology requires the better service. To overcome these problem, the operator have to do Drive Test to identify and analyz the network quality of service, to improve the learning activities about Drive Test then needed an option for it. It can be overcome by the module Drive Test lab manual with applications that can support the user with an attractive visual display. The application materials will be designed on the basis of such a simulation about Drive Test Handover process, the process occurs as a result of Drop Call or constraints of a mobile network that frequently appear on the user's mobile phone, and the basic steps Drive Test. This lab manual application modules is created using a mobile Augmented Reality technology. The method which is used for the development of systems using waterfall SDLC (System Development Life Cycle). The visualization of the application made by Blender 2.69 using 3D objects. This application adds to the user experience more with 90.31% index points of total maximum of 100% which indicates that the application is easy to use and easy to be learned, This application works optimally if the light in a location that has a minimal emission of 3 Lux to 6 Lux for outdoor and indoor.
Downloads
References
[2] Furt, B. (2011). Hand Book Of Augmented Reality. Boca Raton ,Florida: Springer.
[3] Turban, E. (2003). Decision Support Systems And Intelligent Syatems (Sistem Pendukung Keputusan Dan Sistem Cerdas) Jilid 1. Yogyakarta: Andi Offset.
[4] Efendy, I. (2014). It-Jurnal. Retrieved http://www.It-Jurnal.Com/2014/05/Pengrtian-Augmented-Reality-Ar.Html.
[5] Sudarman, Dede. (2014).Draf Buku Simulasi Digital.Depok : Universitas Gunadarma.
[6] Qualcomm. (N.D.). Qualcomm Developer Network. Https://Developer.Qualcomm.Com/Mobile-Development/Add-Advanced-Features/Augmented-Reality-Vuforia.
[7] Geroimenko, V. (2012). Augmented Realitytechnology And Art: The Analysis And Visualization Of Evolving Conceptual Models. In Augmented Realitytechnology And Art: The Analysis And Visualization Of Evolving Conceptual Models
(Pp. 445-453).
[8] Riski, Y. (N.D.). Markerless Augmented Reality Pada Perangkat Android. Surabaya: Institut Teknologi Sepuluh November.
[9] Safaat, N. (2011). Android, Pemograman Aplikasi Mobile Smartphone Dan Tabelt Pc Berbasis Android. Bandung: Informatika Bandung.
[10] Hikmaturokhman, Alfin., Muayyadi Ali., A Ulva T Wello., Analisis Performansi Pada Jaringan Gsm 900/1800 Di Area Purwokerto, Seminar Nasional Aplikasi Teknologi Informasi (Snati) Uii Yogyakarta.,2010.
[11] Hikmaturokhman, Alfin, Diktat Kuliah Gelombang Mikro, Akatel Sandhy Putra Purwokerto. 2007
[12] Wardana, L. (2011). 2g/3g Rf Planning And Optimization. Jakarta Selatan: Nulisbuku.Com.
[13] Goksel, S. (2003). Optimation And Logfile Analysis In Tems. In Optimation And Logfile Analysis In Tems. Ericsoon Tems Handbook.
[14] Al-Kautsar, F. (2009). Optimasi Pelayanan Jaringan Berdasarkan Drive Test. Depok: Universitas Indonesia.
[15] Hikmaturokhman, Alfin., Wardhana., Lingga. (2014), 4g Handbook Edisi Bahasa Indonesia, Jakarta Selatan: Nulisbuku.Com. Lingga
[16] Hikmaturokhman, Alfin., Wardhana., Lingga. (2015), 4g Handbook Edisi Bahasa Indonesia Jilid 2, Jakarta Selatan: Nulisbuku.Com.
[17] Sari, A. P. (2013). Analisis Benchmarking Jaringan 3g Operator Hcpt Dan Xl Di Area Jakarta. Reka Elkomika, 154.
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
