DESIGN SYSTEM PROTOTYPE SMART PARKING SYSTEM BASED ARDUINO AND MONITORING THROUGH SMARTPHONE
Abstract
This design Smart Parking aims to design a microcontroller device that is Smart Parking that can inform and direct the driver to the empty parking area. The parking lot used as the research object consists of several parking locations with the capacity of several vehicles, but this study only selects some parking slots as samples. In this design has several common parts used, namely ultrasonic sensors HC-SR04, Arduino Mega, PC / laptop, LCD (Liquid Cristal Display) and IOT (Internet Of Things) research indicates that the LCD will show several parking slots already occupied and Some empty parking slots and monitoring via Smartphone using the Blynk app. As for the crossbar entrance of the parking area using a tool that is servo, and Arduino UNO as the operation of the parking doorstop. In this design the distance of the parking sensor below 6cm indicates that parking slots are occupied and above 6cm indicating the parking slot conditions available on LCD and Blynk applications. As for servo bar entry detects the car at a distance below 5cm servo will open with delay of 3 seconds and if above 5cm indicates that there is no car in front of the sensor bar.
Downloads
References
[2] Budiharto, W. (2012). Panduan Praktikum Mikrokontroler AVR ATMega16. PT. Elex Media Komputindo, Jakarta.
[3] Murti, Y. (2016). Rancang Bangun Prototipe Pengendali Peralatan Rumah Tangga Menggunakan Arduino dan Smartphone. Skripsi. Universitas Bangka Belitung. Bangka.
[4] Aji, W. S., Hermawanto, F., Muchlas (2010). ”Purwarupa Robot Pemadam Api Dengan Sensor Ultrasonik Dan Ultraviolet Berbasis AT89S52” Tugas Akhir, Universitas Ahmad Dahlan, Yogyakarta.
[5] Sugiharto, A. (2013). Penerapan Dasar Tranduser dan Sensor. Kanisius, Yogyakarta.
[6] http://www.innovativemobility.org/smart_parking/Smart_Parking.shtml. Innovative Mobility: Smart Parking Management: A Bay Area Rapid Transit (BART) District Parking Field Test and ResearchEvaluation (diakses pada 12 Oktober 2016).
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);