ANALYSIS RELIABILITY OF BANGKA-LEPAR SUBMARINE CABLE
DOI:
https://doi.org/10.33019/ecotipe.v6i2.1071Keywords:
Laying Procedur, Reliability, Submarine Cower CableAbstract
This study evaluates the reliability of submarine power cable 20 kV Bangka-Lepar. The Submarine power cable also describes the medium voltage distribution network at Bangka-Lepar and determines the correlation of various parameters that affect network operations and then provides information about the power cable itself and laying procedures. Furthermore the research conducts with reliability analysis based on statistical models. This model is used to evaluate characteristics operational cable such as failure rates of natural or human causes, and is also used to choose between two cable routes and to determine one maximum reliability
Downloads
References
N. P. Ventikos and D. I. Stavrou, “Submarine power cables: Laying procedure, the fleet and reliability analysis,” J. Mar. Eng. Technol., vol. 12, no. 1, pp. 13–26, 2013.
I. Transactions and P. Delivcry, “good example of this. Feasibility study of a submarine cable project plays an important role because, if,” Power, vol. 7, no. 2, 1992.
C. A. dkk. Arkell, “Design, manufacture and installation of 150 kV submarine cablesystem for the Java-Madura interconnection.”
T. A. Short, Electric Power Distribution Equipment and Systems. 2006.
R. and R. N. A. Billinton, Reliability Evaluation of Engineering Systems. 1992.
Downloads
Published
Issue
Section
License
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
