AUTOMATIC SETPOINT DOWN COUNTER COUNTING ON TRAFFIC LIGHTS USING LED DOT MATRIX PANEL
DOI:
https://doi.org/10.33019/ecotipe.v4i2.9Keywords:
atmega 32, dot matrix panel, down counter, traffict lightAbstract
Down counter on the traffic light provides information for drivers on how long the lamps will be on or off, then they are not careless who can cause traffic jam and accidents. The instalation of down counter needs value of set point which derived from the traffic light controller or it is set manually by technician. The design of down counter which is capable of standing by itself, it is possible to use less cables and it will facilitate on its time changing and the maintenance of traffict light. In this research, a down counter which counts by itself will be create value of set point which designed by using display of let dot matrix panel with the size of 32x32 pixel. It is able to display figures as many as 2 digits of 99 until 00.
Downloads
Downloads
Published
Issue
Section
License
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
