SELECTION OF BLADE MATERIALS FOR THE DESIGN AND MANUFACTURING OF HORIZONTAL AXIS WIND TURBINE PROTOTYPES
Abstract
Electrical power is a a vital requirement for economic development and social development. Beyond the importance of the function of electrical energy for the community, it is very unfortunate that not all areas in Indonesia that are irrigated plants. The breakdown of power supplies is not separated from the problem of insufficient power generation of electricity. Overcome this problem it is necessary to glance alternative electric energy generation business-friendly environment, available all day long and easily in installation. Wind energy power plants may be a solution. Degan wind speeds in the range 5 m / s in Indonesia need to designed a wind turbine to rotating and generate energy even for a rotating with a low speed. The selected wind turbine is the horizontal axis wind turbine blades having a shapes similar to a propeller - blades aircraft in general.
Material planned for the horizontal axis wind the turbine was originally wood that is readily available material and easy to shape. This wooden blade length of about 0.75 m, but after completed and assembled the turbine was not rotate even though the wind speed has reached 4 m / s, this is certainly not fit for purpose of the study. The next material is arkrilik, this type has advantages compared to wood material that is lightweight, thin and of sufficient strength. Expected to advantages, this wind the turbine will be able to work as expected
Downloads
References
Puriza, M. Yonggi. (2012). Perancangan dan Pembuatan Prototipe Turbin Angin Sumbu Horizontal. Universitas Andalas. Padang. Sumatera Barat.
Erich Hau, Wind Turbines Fundamentals, Technologies, Application, Economics, 2ndEdition, terjemahan Horst von Renouard, Springer, Germany, 2005
http://elearning.gunadarma.ac.id/docmodul/dasar.../bab6_energi_angin.pdf. akses tgl 2 maret 2011
Alamsyah, Heri. (2007). Pemanfaatan Turbin Angin Dua Sudu Sebagai Penggerak Mula Alternator Pada Pembangkit Listrik Tenaga Angin. JTE UNS : Semarang.
Lungan, Fransiscus. (2008). Perancangan dan Pembuatan Turbin Angin Sumbu Horizontal Tiga Sudu Berdiameter 3.5 Meter Dengan Modifikasi Pemotongan dan Pengaturan Sudut Pitch. JTM. FTTM ITB : Bandung.
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);