Optimization of Small-Scale Coffee Roasting Machine with Servo Temperature and Angle Control for Consistent Roasting Results
DOI:
https://doi.org/10.33019/jurnalecotipe.v12i1.4551Keywords:
Coffe Roasting Machine, IoT Blynk, Monitoring System, Remote Monitoring, Servo Angle, Temperature Control, ThermocoupleAbstract
The coffee roasting process is essential for creating distinctive aromas and Flavors. Manual roasting often results in uncontrolled temperatures, resulting in uneven and burnt coffee beans. Therefore, an automatic roasting machine was developed to control stable temperatures at setpoints of 180°C (light roast), 220°C (medium roast), and 250°C (dark roast), with a monitoring system to ensure optimal results. Servo angle settings are used to optimize temperature stabilization, while a DC fan serves to remove excess heat from the machine. The system uses an Arduino Uno and ESP32, with a Thermocouple Type K temperature sensor and an I2C LCD display for real-time monitoring. Integration with IoT Blynk allows remote monitoring and control through a mobile application. Research shows that a servo angle of 140° provides the optimal temperature increase, while an angle of 100° is effective for lowering the temperature when it exceeds the setpoint. These angles are used in the system to keep the temperature controlled according to the specified target.
Downloads
References
N. Núñez, C. MartÃnez, J. Saurina, and O. Núñez, “High-performance liquid chromatography with fluorescence detection fingerprints as chemical descriptors to authenticate the origin, variety and roasting degree of coffee by multivariate chemometric methods,†J Sci Food Agric, vol. 101, no. 1, pp. 65–73, 2021, doi: 10.1002/jsfa.10615.
E. Bertone, A. Venturello, A. Giraudo, G. Pellegrino, and F. Geobaldo, “Simultaneous determination by NIR spectroscopy of the roasting degree and Arabica/Robusta ratio in roasted and ground coffee,†Food Control, vol. 59, pp. 683–689, 2016, doi: 10.1016/j.foodcont.2015.06.055.
E. Dybkowska, A. Sadowska, R. Rakowska, M. Dębowska, F. Świderski, and K. Świąder, “Assessing polyphenols content and antioxidant activity in coffee beans according to origin and the degree of roasting,†Rocz Panstw Zakl Hig, vol. 68, no. 4, pp. 347–353, 2017, [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85043395098&partnerID=40&md5=33b81ec5ec9c95140b01914b5da2d6e6
L. Febvay et al., “Identification of markers of thermal processing (‘roasting’) in aqueous extracts of Coffea arabica L. seeds through NMR fingerprinting and chemometrics,†Magnetic Resonance in Chemistry, vol. 57, no. 9, pp. 589–602, 2019, doi: 10.1002/mrc.4834.
M. Basile and I. Kikic, “A lumped specific heat capacity approach for predicting the non-stationary thermal profile of Coffee during roasting,†Chem Biochem Eng Q, vol. 23, no. 2, pp. 167–177, 2009, [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-70450237315&partnerID=40&md5=64cc8668bed1e7afe15dc1100b8e601d
H. Yohanes et al., “Blue Ocean Strategy Approach and Canvas Business Model for New Technology: Case Study of a Spouted Bed Coffee Roaster System,†in AIP Conference Proceedings, 2024. doi: 10.1063/5.0183894.
S. A. Putra, U. Hanifah, and M. A. Karim, “Theoretical study of fluidization and heat transfer on fluidized bed coffee roaster,†in AIP Conference Proceedings, 2019. doi: 10.1063/1.5098287.
S. Sulistyo and R. M. N. Aulia, “Design and manufacturing of portable coffee roaster,†in AIP Conference Proceedings, 2023. doi: 10.1063/5.0143259.
O. A. Ogunjirin, M. Olayinka, A. J. Farounbi, J. A. Oyedokun, and O. A. Ola, “Instrumentation of NCAM developed coffee roasting machine,†in IOP Conference Series: Earth and Environmental Science, 2020. doi: 10.1088/1755-1315/445/1/012004.
Y. Pratama, I. G. E. Dirgayussa, P. F. Simarmata, and M. H. Tambunan, “Detection roasting level of lintong coffee beans by using euclidean distance,†Bulletin of Electrical Engineering and Informatics, vol. 10, no. 6, pp. 3072–3082, 2021, doi: 10.11591/eei.v10i6.3153.
O. A. Ogunjirin, O. M. Odeniyi, A. S. Olubo, A. J. Farounbi, O. A. Ola, and S. A. Adeleke, “Design and construction of an electrically powered coffee roasting machine,†in IOP Conference Series: Earth and Environmental Science, 2020. doi: 10.1088/1755-1315/445/1/012009.
R. Wulandari, M. A. Mizar, A. Aminnudin, I. G. R. S. Dirgantara, A. D. N. Luthfianto, and P. Sihassaleh, “Heat transfer through a clay furnace in a coffee roasting machine to produce coffee with a distinctive aroma,†in AIP Conference Proceedings, 2023. doi: 10.1063/5.0150485.
L. E. Yulianti, D. P. Putri, I. F. Azizah, S. Witman, M. A. Karim, and A. Rahayuningtyas, “Physicochemical Properties of " Cisalak’Robusta Coffee With Hot Air Based Roasting Method,†in BIO Web of Conferences, 2023. doi: 10.1051/bioconf/20236903014.
A. Rahayuningtyas et al., “Evaluation of Fluidized-Bed and Drum Roaster Performance in Roasting of Robusta Green Bean,†in BIO Web of Conferences, 2023. doi: 10.1051/bioconf/20236903006.
T. H. Nasution, A. Putramas, and I. Siregar, “Automatic coffee roaster design using Arduino,†in AIP Conference Proceedings, 2018. doi: 10.1063/1.5080068.
T. Inovan, A. I. Cahyadi, and O. Wahyunggoro, “Implementation of Adaptive-PID Based Temperature Trajectory Tracking Control to Improve Repeatability in Coffee Roasting,†in Proceedings of the 2023 IEEE International Conference on Industry 4.0, Artificial Intelligence, and Communications Technology, IAICT 2023, 2023, pp. 162–167. doi: 10.1109/IAICT59002.2023.10205885.
A. H. Falah, M. Rivai, and D. Purwanto, “Implementation of Gas and Sound Sensors on Temperature Control of Coffee Roaster Using Fuzzy Logic Method,†in Proceedings - 2019 International Seminar on Intelligent Technology and Its Application, ISITIA 2019, 2019, pp. 80–85. doi: 10.1109/ISITIA.2019.8937148.
P. C. Ayu, M. R. Machrizailani, A. Rohanah, K. N. Sinamo, and N. U. W. Sebayang, “Design of coffee roaster with controlled temperature system to maintain the sustainability of coffee roasting process,†in IOP Conference Series: Earth and Environmental Science, 2024. doi: 10.1088/1755-1315/1302/1/012116.
B. Purwantana, R. P. Alamsyah, and H. D. Prawira, “Design of Portable Coffee Roaster for Home Industry,†in IOP Conference Series: Earth and Environmental Science, 2019. doi: 10.1088/1755-1315/327/1/012019.
B. Samodro, B. Mahesworo, T. Suparyanto, D. B. Surya Atmaja, and B. Pardamean, “Maintaining the Quality and Aroma of Coffee with Fuzzy Logic Coffee Roasting Machine,†in IOP Conference Series: Earth and Environmental Science, 2020. doi: 10.1088/1755-1315/426/1/012148.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
