PREDICTIVE PID CONTROL DESIGN FOR ROBOT MODEL SEGWAY
DOI:
https://doi.org/10.33019/ecotipe.v1i1.44Keywords:
Controller, Disturbance, Elevation Angle, SegwayAbstract
The segway plant has a certain load change and noise thus requare a controller that can handle both these problems. PID controller is able to control the plant when angle inclination changes that occurred not too large. For the PID, the value of sensor variables are angle elevation, then its parameters estimation problem is also different from the estimation of the parameters that are not angle valued, the reason is the nonexistence of linearity from data accelerometer sensor. This robot has ability to maintain balance with two wheels and work at an angle of -8 degrees to +8 degrees to obtain a balance.
Downloads
Download data is not yet available.
Downloads
Published
30.04.2014
Issue
Section
Articles
License
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
How to Cite
[1]
T. H. Budianto, “PREDICTIVE PID CONTROL DESIGN FOR ROBOT MODEL SEGWAY”, JurnalEcotipe, vol. 1, no. 1, pp. 37–41, Apr. 2014, doi: 10.33019/ecotipe.v1i1.44.
