Control of Multi-Robot Arms in Object Retrieval Based on Human-Machine Interface

Rendyansyah Rendyansyah; Hera Hikmarika; Melia Sari; M. Al Furqon Syaidin Fikri; Ichlasul Akmali Rizky

doi:10.33019/jurnalecotipe.v11i2.4528

Rendyansyah Rendyansyah Teknik Elektro, Fakultas Teknik, Universitas Sriwijaya
Hera Hikmarika Universitas Sriwijaya
Melia Sari Universitas Sriwijaya
M. Al Furqon Syaidin Fikri Universitas Sriwijaya
Ichlasul Akmali Rizky Universitas Sriwijaya

DOI: https://doi.org/10.33019/jurnalecotipe.v11i2.4528

Abstract

Multi-robot arm control is the result of the development of advanced robotics technology. With the advancement in the field of human-machine interface, controlling robot arms has become more efficient and can be done intuitively by humans. In this study, we designed three robot arms of 4-DoF, each of which is controlled by a computer in a visual program interface. This research aims to develop a human-machine interface-based multi-robot arm control system that allows humans to interact with the robots directly. The movement method of each robot uses Trajectory Planning, which works when the operator gives motion commands through the interface display. Multi-robot communication with a computer using USB hub serial format. The computer is the master, and each Arduino on the robot is the enslaved. Three robot arms have been tested and controlled by the HMI computer, and all of them move according to the commands of the operator. The time required by each robot to complete its mission is ± 10 seconds. The results of this study are expected to open new opportunities in the application of robotics in various fields, such as the manufacturing industry, health services, and transportation.

Keywords: Multi-Robot Arm; Human Machine Interface; Trajectory Planning

Downloads

Download data is not yet available.

References

L. Pérez, S. Rodríguez-Jiménez, N. Rodríguez, R. Usamentiaga, and D. F. García, “Digital Twin and Virtual Reality Based Methodology for Multi-Robot Manufacturing Cell Commissioning,” Appl. Sci., vol. 10, no. 10, pp. 1–18, 2020.

A. Bolu and O. Korcak, “Adaptive task planning for multi-robot smart warehouse,” IEEE Access, vol. 9, pp. 27346–27358, 2021.

A. Grau, M. Indri, L. Lo Bello, and T. Sauter, “Robots in industry: The past, present, and future of a growing collaboration with humans,” IEEE Industrial Electronics Magazine, pp. 50–61, 2020.

M. L. Nicora, R. Ambrosetti, G. J. Wiens, and I. Fassi, “Human–Robot Collaboration in Smart Manufacturing: Robot Reactive Behavior Intelligence,” J. Manuf. Sci. Eng., vol. 143, no. 3, pp. 1–9, 2021.

D. Mourtzis, J. Angelopoulos, and N. Panopoulos, “The future of the human–machine interface (HMI) in society 5.0.,” Futur. Internet, vol. 15, no. 162, pp. 1–25, 2023.

H. Roibu, L.-C. Bazavan, S.-I. Cismaru, and N. G. Bizdoaca, “HMI for cooperative robot Kuka youBot based on Electromyography technique,” in 11th International Conference on Modern Circuits and Systems Technologies (MOCAST), 2022, pp. 1–4.

I. Rokhim, P. Anggraeni, H. Khoirunnisa, and H. M. Purnama, “Pengendalian End Effector Robot Lengan untuk Aplikasi Pick and Place dengan Metode Persamaan Garis,” J. Teknol. Rekayasa, vol. 6, no. 1, pp. 7–14, 2021.

I. H. Ayega, T. A. Tamba, and B. M. Arthaya, “Rancang Bangun Purwarupa Manipulator Lengan Robot Dengan Tiga Derajat Kebebasan,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 11, no. 3, pp. 796–810, 2023.

Rendyansyah et al., “Pengendalian Robot Manipulator 4 DOF Berbasis Tampilan Visual pada Komputer,” in Annual Research Seminar (ARS), 2020, pp. 105–109.

Rendyansyah, A. P. P. Prasetyo, K. Exaudi, and S. Sembiring, “Pergerakan Robot Lengan Pengambil Objek Dengan Sistem Perekam Gerak Berbasis Komputer,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 8, no. 2, pp. 230–240, 2022.

T. F. Abbas, A. A. Khleif, and M. Q. Abbood, “Velocity Kinematics Analysis and Trajectory Planning of 5 DOF Robotic Arm,” Eng. Technol. J., vol. 38, no. 5, pp. 738–747, 2020.

M. F. W. Satriatama and L. Halim, “Perancangan Awal dan Simulasi Lengan Robot 3 Derajat Kebebasan Berbasis Arduino yang Dikontrol dengan Aplikasi,” J. Tek. Mesin dan Mekatronika, vol. 7, no. 2, pp. 118–130, 2022.

Z. Nurkholik, F. Alif, and D. Arie, “Rancangan Bangun Lengan Robot Arm Untuk Menggambar Menggunakan Invers Kinematik,” J. Ilm. Sist. Inf., vol. 1, no. 3, pp. 59–68, 2022.

H. Afrisal, B. Setiyono, M. F. Yusuf, R. M. Suin, and O. Toirov, “Trajectory Planning with Obstacle Avoidance of 3 DoF Robotic Arm for Test Tube Handling System,” in In 2020 7th International Conference on Information Technology, Computer, and Electrical Engineering (ICITACEE), 2020, pp. 41–46.

P. A. Parikh, R. Trivedi, and J. Dave, “Trajectory planning for the five degree of freedom feeding robot using septic and nonic functions,” Int. J. Mech. Eng. Robot. Res., vol. 9, no. 7, pp. 1043–1050, 2020.

Rendyansyah, B. Y. Suprapto, H. Hikmarika, and Irmawan, “Application of Learning Vector Quantization and Trajectory Planning On a 4-DoF Robotic Arm to Move the Object,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 10, no. 2, pp. 268–276, 2023.