Implementation OEE in Integrating Siemens S7-1200 Data with Odoo ERP
Abstract
The integration of perational Technology (OT) and Information Technology (IT) is crucial for enterprise-level decision-making regarding company effectiveness and productivity. This integration is achieved by developing an integrator system in the form of an API service, which facilitates the connection between Programmable Logic Controller (PLC) and Odoo Enterprise Resource Planning (ERP). Integration allows IT systems synergize with OT systems to processing data obtained from the performance of industrial machines. Analysis was conducted using the Overall Equipment Effectiveness (OEE) method to monitor the company’s production outcomes. A prototype sorting system with PLC for controlling was created as an OEE implementation. The API service acquires data from the plant and performs preliminary analysis in Odoo ERP. The analysis in Odoo ERP is conducted through the development of a manufacturing module that applies the OEE method calculations to monitor the effectiveness and efficiency of production procces. Once the calculation result is obtained, these data are monitored on Grafana in the form of pie charts and graphs. This research yielded insight into the design and implementation of an integration system for the bottle sorting process. The result also could be monitored in real-time using Odoo ERP and Grafana. Furthermore, the OEE analysis was matched with manual calculations in order to ensure its validity. Thus, this research enables the production process to be optimized and provides significant benefits to the company.
Downloads
References
R. E. Wulansari, A. F. Khasanah, M. Djunaidi, J. T. Industri, F. Teknik, dan U. M. Surakarta, “Prosiding IENACO 2020 Teknik Industri UMS (18 Maret 2020) 185,” hal. 185–193, 2020.
Muhammad Naufal ’Izzudin, “Mesin Sag-Mill Menggunakan Support Vector Regression,” 2023, [Daring]. Tersedia pada: https://repository.its.ac.id/104344/.
N. Niland et al., “Analisis Pengukuran Overall Equipment Effectiveness (OEE) dan Overall Labour Effectiveness (OLE) Sebagai Rekomendasi Untuk Peningkatan Produktivitas Fall Board,” Glob. Heal., vol. 167, no. 1, hal. 1–5, 2020, [Daring]. Tersedia pada: https://www.e-ir.info/2018/01/14/securitisation-theory-an-introduction/.
F. N. Asita, M. K. Hasin, Z. Maulana, dan A. Putra, “Pengiriman Data Realtime PLC ke ERP Odoo dengan Dilengkapi Analisa OEE,” vol. 15, no. x, hal. 1–13, 2023.
Tri Baswara Ari Aji, Hamidillah Ajie, dan Murien Nugraheni, “Pengembangan Web Service Aplikasi Manajemen Aset Upt Tik Universitas Negeri Jakarta,” PINTER J. Pendidik. Tek. Inform. dan Komput., vol. 6, no. 2, hal. 69–75, 2022, doi: 10.21009/pinter.6.2.9.
R. Riyandar, M. Wildan, A. Goeritno, dan J. Irawan, “Pengembangan Embedded Device Berbasis PLC untuk Simulator Rejection System dengan Penambahan Human Machine Interface,” J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 5, no. 6, hal. 1171–1181, 2021, doi: 10.29207/resti.v5i6.3641.
R. T. Darmawan, “Implementasi Grafana untuk Auto-Scaling pada NGINX Web-Server di Lingkungan Docker Container,” Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 7, no. 7, hal. 3163–3167, 2023.
L. Lukmandono, E. Sulistyowati, dan ..., “Pendekatan Overall Equipment Effectiveness Dan Response Surface Methodology Dengan Pertimbangan Root Cause Failure Analysis Untuk Meminimalkan Six Big …,” Katalog Buku Karya …, hal. 70–112, 2020, [Daring]. Tersedia pada: http://ejurnal.itats.ac.id/buku/article/view/1439/0.
M. H. A. Soliman, “Overall Equipment Effectiveness Simplified: Analyzing OEE to Find the Improvement Opportunities,” no. September, 2020, doi: 10.5281/zenodo.4274026.
M. Dipa, F. D. Lestari, M. Faisal, dan M. Fauzi, “Analisis Overall Equipment Effectiveness (Oee) Dan Six Big Losses Pada Mesin Washing Vial Di Pt. Xyz,” J. Bayesian J. Ilm. Stat. dan Ekon., vol. 2, no. 1, hal. 61–74, 2022, doi: 10.46306/bay.v2i1.29.
M. Yusri, A. Maulana, A. Fitriati, dan M. Nur, “Rancang Bangun Sistem Sortir Ikan Berdasarkan Berat Berbasis Plc,” MAPLE Mechatronics J. Prof. Enterp., vol. 4, no. 2, hal. 48–53, 2022, [Daring]. Tersedia pada: https://jurnal.politeknikbosowa.ac.id.
P. P. and N. C. S. Pichidtienthum, “Developing Module Generation for Odoo Using Concept of Low-Code Development Platform and Automation Systems,” Int. Conf. Ind. Eng. Appl., hal. 529–533, 2021.
B. M. Ridwan, “Penerapan Enterprise Architecture Pada Perusahaan Manufaktur Baja di Era Industri 4.0,” JATISI (Jurnal Tek. Inform. dan Sist. Informasi), vol. 9, no. 3, hal. 2652–2663, 2022, doi: 10.35957/jatisi.v9i3.2000.
I. V. Nițulescu dan A. Korodi, “Supervisory Control and Data Acquisition Approach in Node-RED: Application and Discussions,” Internet of Things, vol. 1, no. 1, hal. 76–91, 2020, doi: 10.3390/iot1010005.
E. K. Karmilawati, K. M. Mulyono, dan S. N. Nugroho, “Pendekatan OEE (Overall Equipment Effectiveness) Untuk Mengurangi Losses Pada Mesin Moulding Cerex,” J. Optimasi Tek. Ind., vol. 3, no. 2, hal. 46, 2021, doi: 10.30998/joti.v3i2.8576.
Copyright (c) 2024 Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright in each article is the property of the author.
- The author acknowledges that the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) has the right to publish for the first time with a Creative Commons Attribution 4.0 International License.
- The author can enter the writing separately, regulate the non-exculsive distribution of manuscripts that have been published in this journal into other versions (for example: sent to the author's institution respository, publication into books, etc.), by acknowledging that the manuscript was first published in the Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering);
.JPG)
